Super Absorbent - High Sensitivity

Multi-4 - 4 Zone Detection Cable has been used for over ten years in areas where maximum leak detection sensitivity is essential.

Although superceded by Andel's more modern Multi-8 all-polymer detection cables for general usage, the highly absorbent Multi-4 cable is the best option where sensitvity to the smallest amount of water or condensation is required.

One length of Multi-4 - 4 Zone Detection Cable can provide up to four separately reporting zones.  The zone changeover points along the cable are provided by the Floodline 4 Zone Junction boxes.  The zones can be any length but the usual length is between 5 and 15m.

Multi-4 - 4 Zone Detection Cable incorporates a fine multi-filament cellulosic outer covering which acts just like a wick. Water is "sucked" into the inner detection cores allowing the system to react to the smallest drip. A special colour change system is built into the cable giving permanent evidence that the cable has been wet - and where -  even after it has dried.

Applications:
Attach to the underside of the pipes (inside or outside the lagging)
Laid in drip-trays and catchment troughs
Fix to soffits and ceilings to detect water ingress

Detection:
Activates with any conductive liquid anywhere along the entire length of the detection cable.  Once dry can be returned to use in most cases.

Construction:
Inner PVC core with cellulosic covered detection cores.  Multi-filament cellulosic outer covering.

Dimensions:
Oval in shape, 4mm x 6mm

Fixing:
For fixing to floor or other surface.  Use standard 6mm Tower Clip or self-adhesive clips, or fix to the underside of pipes with tie-wraps or tape inside or outside any lagging.

 Click here for all data sheets