The Multi-Zone Control Panel operates the network of leak detection zones.  A zone can be a single point or many metres long and the whole network is continuously monitored for leaks and continuity.  Zones are electrically isolated from each other and individually displayed so the system can accept and report any number of simultaneous or consecutive zone alarms - true multiple leak reporting - an alarm zone has no effect on the normal monitoring of its neighbours or the rest of the system.

LEDs provide clear and easy to understand status and alarm information.  Output relays are provided for connection to remote alarms, BMC etc. Leak detection is shown clearly as LEAK.  Sensor or cable damage or failure is shown as SYSTEM FAULT.

Function:
Water/liquid leak detection (other 12VDC latchable sensing devices can also be connected)

Capacity:
4,8,16,32,64 and 96 Zones

Power:
110/230 VAC, 50Mhz, mains operated, 12VDC internal and battery back-up

Construction:
Light grey powder coated steel enclosure

Dimensions:
H292mm x W285mm x D90mm (4, 8 and 16 zone - see relevant data sheet)

Fixing:
Wall/Surface mounted (special mounting arrangements to order)

Monitoring:
LEAK - continuous water/liquid detection - each zone separately
SYSTEM FAULT - sensor or leader cable damage, failure or disconnection

Alarm Indicators:
Flashing LEDs for LEAK or SYSTEM FAULT (all alarms displayed separately and continuously, until corrected and restored)
Buzzer

Status Indicators:
Mains power supply
battery operation
internal 12VDC supply
low battery
alarm accept (mute)

Function Switches:
Mute (buzzer silence/alarm accept) button
security key-switch
output disable/reset

Outputs:
1. LEAK in any zone - DPCO relay
2. SYSTEM FAULT in any zone - SPCO relay
3. Drop dead/power fail - SPCO relay
4. LEAK in each individual zone - SPCO relay - optional

All relays have "clean" volt-free contacts

 Andel-Floodline Multi-Zone Control Panels (193.96 kB)